硬件平台： ZYNQ7020
操作系统： VxWorks 7.0
硬件配置：
CPU : ZYNQ7020
DDR: DDR3 SDRAM 2048 MB
NAND: 512 MB
SPI FLASH: 64 MB
网口： 1 路10/100/1000 Mbps
串口 : 1 路/可配置PL
USB： 1 路
音频： 播放/录音
显示： 1 路 HDMI
SPI： 1 路/可配置PL
I2C : 1 路/可配置PL
OTG: 1路（和HOST共用）
RTC: n/a
CAN: 可配置最多 2 路
启动记录：
U-Boot 2017.01
Model: Zynq Zed Development Board
Board: Xilinx Zynq
I2C: ready
DRAM: ECC disabled 2 GiB
MMC: sdhci@e0100000: 0 (SD) 7616MiB,sdhci@e0101000: 1 (MMC) 7824 MiB
SF: Detected w25q256 with page size 256 Bytes,erase size 4 KiB, total 32 MiB
In: serial@e0001000
Out: serial@e0001000
Err: serial@e0001000
Model: Zynq Zed Development Board
Board: Xilinx Zynq
Net: ZYNQ GEM: e000b000,phyaddr 1, interface rgmii-id
ethernet@e000b000 connected to AtherosAR8031
eth0: ethernet@e000b000
Hit any key to stop autoboot: 0
system volume information/
607699 boot.bin
4011674 system_wrapper.bit
4070008 uvxworks
5082 zynq-zc702.dtb
5 file(s), 1 dir(s)
reading uVxWorks
3960008 bytes read in 357 ms (10.6MiB/s)
reading zynq-zc702.dtb
5082 bytes read in 26 ms (190.4 KiB/s)
## Booting kernel from Legacy Image at 05000000 ...
Image Name: vxWorks
Image Type: ARMVxWorks Kernel Image (uncompressed)
DataSize: 3959944 Bytes = 3.8 MiB
Load Address: 00200000
Entry Point: 00200000
Verifying Checksum ... OK
## Flattened Device Tree blob at 04000000
Booting using the fdt blobat 0x4000000
Loading Kernel Image ... OK
Loading Device Tree to1fffb000, end 1ffff3d9 ... OK
## Starting vxWorks at 0x00200000,device tree at 0x1fffb000 ...
Target Name: vxTarget
_________ _________
\77777777\ /77777777/
\77777777\ /77777777/
\77777777\ /77777777/
\77777777\ /77777777/
\77777777\ \7777777/
\77777777\ \77777/ VxWorks 7 SMP
\77777777\ \777/
\77777777\ \7/ Core Kernel version: 1.2.0.0
\77777777\ - Build date: Mar 202017 23:00:59
\77777777\
\7777777/ Copyright Wind RiverSystems, Inc.
\77777/ - 1984-2018
\777/ /7\
\7/ /777\
- -------
Board: Zynq 7000 Development Board
CPU Count: 2
OS Memory Size: 2047MB
ED&R Policy Mode: Deployed
Application Mode Agent: Notstarted
Stop Mode Agent: Not started
Instantiating /sd0:2 as rawFs, device = 0x30001
Adding 10990 symbols forstandalone.
->
-> devs
drvname
0 /null
2 /devCfg
1 /tyCo/0
1 /tyCo/1
10 host:
4 /sd0:1
5 /sd0:2
6 /mmc0:0
7 /mmc0:1
12 /xcan/0
12 /xcan/1
value = 25 = 0x19
->
->
-> ifconfig
lo0 Linktype:Local loopback
inet 127.0.0.1 mask 255.255.255.255
inet6 unicast fe80::1%lo0 prefixlen 64 automatic
inet6 unicast ::1 prefixlen 128
UP RUNNING LOOPBACK MULTICAST NOARP ALLMULTI
MTU:1500 metric:1 VR:0 ifindex:1
RX packets:8 mcast:0 errors:0 dropped:0
TX packets:8 mcast:0 errors:0
collisions:0 unsupported proto:0
RX bytes:344 TX bytes:344
gem0 Linktype:Ethernet HWaddr 00:0a:14:55:00:46
capabilities:TXCSUM VLAN_MTU
inet192.168.88.169 mask 255.255.255.0 broadcast 192.168.88.255
inet6unicast fe80::20a:35ff:fe11:2233%gem0 prefixlen 64 tentative automatic
UP SIMPLEX BROADCAST MULTICAST
MTU:1500 metric:1 VR:0 ifindex:2
RX packets:0 mcast:0 errors:0 dropped:0
TX packets:0 mcast:0 errors:0
collisions:0 unsupported proto:0
RX bytes:24K TX bytes:23K
value = 0 = 0x0
->
->
-> sysRtcSet
Enter the year: 117
Enter the month: 04
Enter the day of the month: 05
Enter the hour(0-23): 23
Enter the minute: 24
Enter the second: 22
value = 0 = 0x0
->
-> sysRtcGet
FRI MAY 05 23:24:30 2017
value = 0 = 0x0
->
